With a width of 510 mm, Chrono 510 can ensure a thorough cleaning of all types of the swimming pools in a short time. Equipped with a second generation gyroscope, which recognizes the dimensions of your pool, CHRONO 510 can calculate the best route and thus optimize the cleaning time. The Chrono 510 is able to clean a pool of 25m x 12m in 1hr 30 min in cross Magellan mode.
DDS Evolution is an innovative dilution system for Hypochlorite Calcium in tablets or in briquettes
The DDS-Multiaction system (hereinafter called DDS-MA ) is a dilution system for biocides in tablets or briquettes (Trichloroisocyanurate acid, Sodium dichloroisocyanurate, Bromine, Oxygen), with max recommended size of 20 g for biocides with low solubility such as Trichloride and Bromine and with larger sizes for very-high solubility biocides such as Dichlorides and Oxygen.
The DEPOLOX® Pool system was designed for measurement and control functions as well as process control in swimming pool water treatment applications.
The DEPOLOX® Pool E 700 P system has been designed for measurement and
control functions as well as process control in pool water treatment applications. Based on individual pool water treatment requirements, the instrument can be configured to measure and monitor all pertinent parameters.
The Ezetrol® plus Controller has been especially designed for all types of swimming pools, spas and water features that are dosed with chlorine.
CIMAI distributes and installs an extensive range of filters from the renowned Australian brand Waterco.
MultiCyclone 70XL Centrifugal Filtration works on the basis of centrifugal water filtration. There are thus parts of the filter that cannot be worn out and no filter media needs to be clean or replaced.
CIMAI provides and installs a wide range of reverse osmosis equipment from the 4040, 8040, with osmotized water flushing and high production reverse osmosis systems with reused water reuse.
Oxiperm® Pro OCD-162 systems produce chlorine dioxide using diluted solutions of sodium chlorite (NaClO2 7,5%) and hydrochloric acid (HCl 9%).
The Barrier® M range of UV systems is designed for the treatment of swimming pool and process water with flow rates ranging from 60 to 5900 US gpm (15 to 980 m3/h).
The DDC pump range is the optimum solution for common applications. The easy-to-use interface with the click wheel makes the setup and operation as easy as your car radio system.
The TEC 2000 easily enables you to monitor, control and manage your facility and safely achieve accurate chemical levels. It also fully supports current European standards, so you can easily adopt these standards without need for an expensive upgrade.
The TEC 3500 easily enables to monitor, contol and manage your facility and safely achieve accurate chemical levels.
The TEC 4000 enables you to monitor, control and manage your facility and safely achieve accurate chemical levels. It also fully supports current European standards, so you can easily adopt these without the need for an expensive upgrade.
Colorimetric monitoring system for the control of the chemical and physicochemical parameters of the pool water.